XMA Corp. was born in 2003 when with the acquisition of the Omni Spectra® Connectorized, Attenuators, and Terminations products from Tyco Electronics, M/A-Com. The XMA team, which includes several former M/A-COM employees, started the company, not only to revitalize the Omni Spectra® line, but also to manufacture the next generation of passive RF and microwave components, including the addition of power dividers/combiners, directional couplers, and a variety of custom configurations. Today, XMA offers the original Omni Spectra® designed components and new designs utilizing domestic, in-house processes. In 2010, XMA expanded this in-house capability with our soft-board technology processes in order to support our original Omni Spectra® Coupler and Divider products. The company continues to create new standard and customized solutions for some of the most advanced communications, military, and aerospace applications today.

Located in Manchester, NH; XMA Corp. inhabits 10,000 sq. ft. of manufacturing floor space.  With United States Design and Manufacturing, XMA manufactures proprietary Thin-film and Thick-film resistive elements, as well as Microwave Printed Circuit Boards.  Since the beginning, XMA has differentiated itself with the use of our resistive "thin-film" hybrid, a proprietary resistor that allows components to perform well under temperature extremes, including cryogenic temperatures. As a result, our parts are especially well-suited for commercial, military, and aerospace applications. It is our thin-film technology that makes Omni Spectra® components vital in cutting-edge microwave solutions.

Coupled with assembly, test, and qualification capabilities in Manchester, NH; XMA provides standard and custom solutions from concept and prototype to full production with little outsourcing.

XMA Corp. operates in an ISO-9001:2000 quality framework.  Full ISO 9001:2000 certification is in-process and is expected soon.  Coupled with Mil-spec compliant design and qualification procedures, all of the XMA products meet or exceed the highest quality standards in the Microwave industry.

Understanding our obligation to comply with all International Traffic in Arms (ITAR) and Export Administration Regulations (EAR), XMA Corp. maintains full United States design and manufacturing with a staff consisting entirely of United States Citizens.

Information contained within Customer requirements and orders may contain information subject to Export Control under the applicable requirements of ITAR (22 CFR, Chapter 1, Subchapter M, Parts 120-130).  XMA makes every effort to protect customer technical data and products from Export.

Regarding the EU Restriction of Hazardous Substances (“RoHS”) Directives, effective July 1, 2006; XMA Corp. is engaged in a comprehensive, company-wide effort to make available products that meet the RoHS limits on the presence of the substances banned or restricted by RoHS [ie-lead, cadmium, mercury, hexavalent chromium, and certain brominated flame retardants (PBB and PBDE) as listed in Article 4 (1) 4 (2)]. Many of XMA Corp. products do not contain these substances and most others comply with limits/restrictions as detailed in this directive from the EU. XMA Corporation offers production quantities in RoHS-compliant versions and continues to pursue scientifically possible resolutions to reduce these materials from the balance of our products. Products which are NOT RoHS compliant will be identified to procuring agents upon request. For further details regarding RoHS compliance for specific products, please, contact XMA Corp.

Cancellation: XMA reserves the right to charge a a fee for cancelled orders up to 25% of the order value plus any fees incurred by XMA as a result.

Sale, resale, and/or use of these goods is intended within the same country as the receiving address above. If resale and/or use is intended for any other country, or as part of a system intended for another country, or in any type of military application even within the same country, the buyer must properly and completely inform XMA Corp. of the end user prior to order being processed. If commodities are to be exported outside of the U.S. the buyer must inform XMA Corp. of the end user before commodities can be shipped. If these commodities, technology, or software are exported from the U.S., it must be in accordance with the U.S. Export Administration Regulations. U.S. Export Administration Regulations and/or the U.S. Department of State may require an export license prior to exporting these goods. Please be advised that even though a commodity has been determined to have an ECCN of EAR-99, an export license may still be required before exporting depending on the destination country and end-use application. As the exporter of these goods, it is your responsibility to determine if licensing is required and to obtain such licensing; if required, prior to exporting. It is the overseas recipient’s responsibility to receive goods in accordance with the import laws of the receiving country. If items are to be exported, End User information must be provided to XMA Corp. if buyer is Intermediary rather than Consignee. Diversion contrary to U. S. law is prohibited.

XMA warrants products of its manufacture to be free from defects in material and workmanship under conditions of normal use. If, within one year of after delivery to the original owner and after prepaid return by the original owner, any XMA product is found to be defective, XMA shall, at its option, repair or replace said defective unit. This warranty does not apply to products that have been disassembled, subjected to misuse, improper installation, repair, alteration, neglect, accident, abnormal conditions of operation, or conditions of operations exceeding the applicable specification or ratings.